Tape copy system
FASTtape2300 copies the recorded image of a tape as it is in block unit.
For example, ideal for the purpose of use to copy one more set of backup tapes and store them in a remote place for disaster prevention.
FASTtape2300 has the following merits compared with copy function of backup software.
1) There is no distinction between a primary tape and a secondary tape and it enables easy recovery because it copies exactly the same tape
2) Since copying off-line, it does not put any load on the operation system.
On the other hand, it is possible to copy to a different type of tape, so you can use it for the purpose to
migrate the tapes written in an older model to a new model at system renewal.
It is also used for copying large numbers of the same tapes for data distribution.
It does not depend on the application and it copies the recorded image of a tape as it is with high speed.
You can make sure if your source data was surely copied to target media.
You can select from “High speed deletion”, “EOT deletion”, “Complete deletion”.
It automatically identifies the tapes written in fixed length blocks or variable length blocks and copies them.
You can specify compression or non-compression for the tapes to copy.
NetVault, Arcserve, BackupExec
It does not put any load on the operation system.
You can store work logs, error logs in the disk and take them out whenever you need.
Support drive | FASTtape2300 | FASTtape2300TX | Compatibility |
---|---|---|---|
DAT72 | ○ | ○ | DDS-3・DDS-4・DAT72: Read/Write |
DAT160 | ○ | ○ | DDS-4・DAT-72・DAT160: Read/Write |
LTO-3 | ○ | ○ | LTO-1: Read LTO-2・LTO-3: Read/Write |
LTO-4 | ○ | ○ | LTO-2: Read LTO-3・LTO-4: Read/Write |
LTO-5 | ○ | ○ | LTO-3: Read LTO-4・LTO-5: Read/Write |
LTO-6 | ○ | ○ | LTO-4: Read LTO-5・LTO-6: Read/Write |
LTO-7 | ○ | ○ | LTO-5: Read LTO-6・LTO-7: Read/Write |
LTO-8 | ○ | ○ | LTO-7・LTO-8: Read/Write |
3490ECMT | - | ○ | 18Tr: Read 36Tr: Read/Write |
3480/3490CMT | - | ○ | 18Tr・36Tr: Read/Write |
Open reel | - | ○ | 800BPI: Read 6025/3200/1600BPI: Read/Write |
* Please contact sales department for further informaton on the installed device.
Model | FASTtape2300 / FASTtape2300TX |
---|---|
Number of the connected drive | Max. 2 sets |
Display/Operation | External monitor, keyboard, mouse |
Copy/Number of Job | 1:1 |
Verify function | Copy, Copy&Verify, Verify |
Deletion mode | High speed, EOT, Complete |
Power consumption *1 | Max. 209W |
Size (mm) *1 | 175(W)x395(H)x419(D) table top |
Weight *1 | 14kg |
*1 excluding tape drive
Model | Configuration |
---|---|
FASTtape2300/ DAT160/LTO-8 |
FASTtape2300, DAT160 x 1set, LTO-8 x 1set, Display monitor, keyboard |
FASTtape2300/ LTO-3/LTO-8 |
FASTtape2300, LTO-3 x 1set, LTO-8 x 1set, Display monitor, keyboard |
FASTtape2300/ LTO-8/LTO-8 |
FASTtape2300, LTO-8 x 2sets Display monitor, keyboard |
FASTtape2300TX/ CMT/LTO-8 |
FASTtape2300, 3490CMT x 1set, LTO-8 x 1set, Display monitor, keyboard |
* Other models with various system configuration are available.
Please contact us for other configuration.